Customer Specified Enclosures

CUSTOMER SPECIFIED ENCLOSURES

A & J Manufacturing Company has specialized in the design and manufacture of customer specified enclosures since 1959. The enclosures have ranged in size and configuration from a small computer card cage to a large multiple bay console and have been designed and tailored to meet the customer’s specified needs.

All of our enclosures are manufactured from 6061-T6 aluminum and are of bolted-together modular construction and meet the requirements of MIL-S-901 Shock and MIL-STD-167-1 Vibration.

With the simplicity of design, no welding, special tooling, or jig fixtures are required, which results in a lower customer cost per enclosure. No special hand tools are required for equipment or rack installation.

DESIGN-MANUFACTURING

The A & J Engineering Department utilizes the latest Cad design software and employs an experienced registered professional engineering staff.

SHIPBOARD MACHINERY REQUIREMENTS

EIA-310 - Racks, Electrical Equipment, 19 inch and Associated Panels
MIL-HDBK-2036 -  Electronic Equipment – General (NAVY)
MIL-S-901 -  Shock Test, Hi-Impact Shipboard Machinery, Equipment and Systems
MIL-STD-167-1 -  Tests, Mechanical Vibrations of Shipboard Equipment
MIL-STD-810 -  Environmental Test Methods for Aerospace and Ground Equipment

STANDARD FINISH SPECIFICATIONS

MIL-DTL-5541 -  Chemical Film (Iridite)  Class 3
MIL-PRF-23377 -  Primer Coating: Epoxy, High Solid
FED-STD-595 -  Federal Standard – Colors
MIL-DTL-15090 -  Enamel – Equipment, Light Gray Class 2
MIL-PRF-22750 -  Epoxy Paint
MIL-PRF-85285 -  Enamel, Semi-gloss
MIL-PRF-85582 -  Waterborne Epoxy Primer

MATERIAL SPECIFICATIONS

ASTM B209 & ASTM B221 -  Aluminum Alloy – 6061-T6
SAE-AMS-STD-66 -  Corrosion Resistant Steel – Type 303
SAE-AMS-QQ-A-250/8 -  Aluminum Alloy – 5052-H32

SAMPLE REQUIREMENT DATA SHEET

In order to plan and design an enclosure to your needs, a checklist titled DESIGN REQUIREMENT DATA SHEET has been furnished in this section.  Completing this data sheet with as many definitive answers as possible will facilitate the preliminary design phase of the requirement.

Given that A & J  Manufacturing Company has more than 50 years experience in designing and manufacturing custom racks and enclosures, the lead times for new designs are reduced significantly.  Typically, a first article model of a new design can be completed in eight weeks from date of order.

Complete the Design Requirement Data Sheet by uploading a filled-in PDF or by filling up the form in this page.

Please download and fill in the DESIGN REQUIREMENTS DATA SHEET PDF, then upload using the form below:

captcha

 

Click here to Fill an online Design Requirements Form

Comments are closed.